triumphs
[Top] [All Lists]

Re: [TR] TR3 Tonneau Cover

To: triumphs@autox.team.net
Subject: Re: [TR] TR3 Tonneau Cover
From: Dave Massey <dave1massey@cs.com>
Date: Sun, 18 Aug 2013 19:53:33 -0400 (EDT)
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <8D06A3D83C2275B-FE0-4D6AD@webmail-vd011.sysops.aol.com> <BLU180-W35C9F189E99C2537A8BA7AE5410@phx.gbl> <8D06A7FCB3BAAE0-970-4843A@webmail-d154.sysops.aol.com> <ECF6C5DC-D1CA-4E62-96B4-46426F9C0172@aol.com>
 You're right, Darrell, I have a bag of them here.  But unless there is a way
to mount those snaps half on the tonneau and half off I don't know if I can
get the thing mounted.  But I get a lot of "you have to let it sit in the sun
and warm up" type of advice so I think I will do that.

BTW the TR3 grills (not the TR3A grills) being sold by Moss and TRF don't fit,
either, but for the opposite reason: too big.

Thanks and see you in 6 weeks.




Dave Massey






-----Original Message-----
From: Darrell Floyd <tr250driver@aol.com>
To: Dave Massey <dave1massey@cs.com>
Cc: triumphs <triumphs@autox.team.net>
Sent: Sun, Aug 18, 2013 6:23 pm
Subject: Re: [TR] TR3 Tonneau Cover


Dave,
Dum question but normally when purchasing a tonneau,boot cover or top etc. the
snaps are not installed so one can adjust the fit to one's car by installing
the
snaps where they required to be.     I just did that procedure on a new TR8
boot
cover since my very nice original was eatin by a bunch of rouge mices.
Darrell


Sent from my iPad

On Aug 18, 2013, at 7:14 PM, Dave Massey <dave1massey@cs.com> wrote:ru

> Fore/aft.  I haven't checked the port/starboard fit.
>
>
>
>
> Dave Massey

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>