Yep.....you're right. I'm exhausted and wrong. :-)
Chad in Tulsa.
________________________________
From: Randall <TR3driver@ca.rr.com>
To:
triumphs@autox.team.net
Sent: Monday, May 27, 2013 9:58 PM
Subject: Re: [TR]
TR6 brake problem
PDWA = Pressure Differential Warning Actuator. What it
does is actuate the
warning (big red light on dash) when there is a pressure
differential. It's
not a valve at all, does not control flow at all. The
seals are only to
keep fluid from leaking out through the switch.
Take a look
at http://goo.gl/fYlAz
You can see how both ends are turned down, so fluid can
flow freely past
even when the piston is against the side of the housing.
--
Randall
** triumphs@autox.team.net **
Donate:
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|