triumphs
[Top] [All Lists]

Re: [TR] another dpo moment

To: triumphs@autox.team.net
Subject: Re: [TR] another dpo moment
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
Date: Fri, 24 May 2013 15:00:48 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <2F0953B9-DD63-4A04-8D6C-D12B21101C34@flash.net><954BDD81-5CA2-4B8A-97CC-2C3358896E25@comcast.net> <519FB4CA.1020200@gmail.com> <A7194E693DF043B8A30EB7322264D93F@Datsun>
User-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:17.0) Gecko/20130509 Thunderbird/17.0.6
On 5/24/13 12:55 PM, Dave wrote:
> does anyone have an access plate that goes behind the master cylinder?
It is a flat sheet metal rectangle with a hole drilled at each corner.  
Put a sheet of paper over the flat section around the hole.  Outline the 
flat section with something that writes. Mark where each of the four 
holes are and you have your template for making a plate.  Aluminum 
works.  ALMOST FORGOT TO MENTION, PUT THE PAPER ON THE INSIDE SURFACE 
AND NOT THE ENGINE BAY SIDE.


>
> it was apparently removed in my car so that - are you ready - the dpo 
> could run a windshield washer fluid tube through that hole
http://www.tr3a.info/Bulkhead.htm

Tube goes through hole # 3.  It is routed along the bulkhead just in 
front of the battery.

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>