triumphs
[Top] [All Lists]

Re: [TR] tr3b starter conclusion

To: Dave <dave@ranteer.com>
Subject: Re: [TR] tr3b starter conclusion
From: Malcolm <malcolm@ipatch.ca>
Date: Thu, 9 May 2013 09:27:20 -0700
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <FC1F6A90671241B49E4B32B0A0EC5BFF@Datsun>
Hi Dave,

If you feel like swapping some more, compare the pinions on the two
starters (TR3B vs TR4).  I had an '85 Bronco II with an engine of
mysterious origin.  The starter went, so I replaced it with one appropriate
for the original engine.  It was not.  After grinding my way through four
starters (thanks, Canadian Tire warranty!) and trying all manner of
band-aid solutions, I finally swapped out the starter pinion for one with
more teeth.  After that, the starter never missed a beat, or a tooth.

Regards,
-Malcolm


On Wed, May 8, 2013 at 8:53 PM, Dave <dave@ranteer.com> wrote:

> seemed like a stumper.  since I have a 63 tr4, I swapped the starter out
> of it
> and installed it in the tr3b.  purrs like a kitten.
>
> so even though I had a freshly rebuilt starter, it clearly was a problem.
>
> and Ib m getting really good at removing and installing starters!
>
> I also had a problem with the starter in the tr6, so this week I have:
>
> removed and reinstalled a starter in the tr6
>
> removed a starter from a tr4
>
> installed, removed, and installed a starter in the tr3b.
>
> I guess a starter needs to go back in the tr4 . . . .
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/malcolm@ipatch.ca

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>