Throttle shaft or bushings worn? Maybe engine vacuum is pulling it into a
bind.
Does it close on its own when you shut down the engine?
On Apr 28, 2013 11:24 AM, "alan salvatore" <alansalvy@gmail.com> wrote:
> I have a problem with the throttle sticking open on the front carb with the
> car running.
>
> I recently rebuilt these carbs and the throttle shows no indication of
> sticking when the car is not running.
> I took the carb off the car and the butterfly does not stick, as I thought
> it might have been out of position.
>
> I even sanded the insulator in case it was interfering.
>
> Put it back on the car, but did not hook up the linkage, movement is good.
> Start the car without hooking up the linkage, move the throttle and it
> hangs up.
>
> I am going to pull it off again and take a look at the throttle shaft.
>
> Any ideas?
>
> Thanks,
> Al
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|