triumphs
[Top] [All Lists]

Re: [TR] TR6 Seat frame common problems

To: "G.D. Huggins" <guy@genfiniti.com>, "Chris Simo" <ccsimonsen@gmail.com>
Subject: Re: [TR] TR6 Seat frame common problems
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Sun, 3 Feb 2013 09:32:16 -0600
Cc: list Triumph <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CANhzkePUWQMopRqfYRt6H_7MbmYzAnvVZ6C_hWdA6J0Vyhoh_Q@mail.gmail.com> <6FB6C22C-86AB-4442-B2F5-D644C12B332E@genfiniti.com>
I don't know if I have great words of wisdom as to how to preserve the seat 
frames, but I will say that I know they can rust, my TR250 frames were 
mostly crumbly red flakes on the bottom portions.  I spent quite a bit of 
time fabricating and welding and grinding up some fiddly little bits to 
repair it.

But this was on a car that had been stored indoors and outdoors and who 
knows where for many years, unless you live in a very corrosive environment, 
such as down by the ocean the things should last pretty long with a fresh 
coat of paint.  I like to use Rust Oleum rusty metal primer followed by the 
appropriate top coat color from them, and have painted many parts as well as 
rusty cast iron outdoor furniture with the stuff and it seems to hold 
corrosion at bay pretty well.

Or you could use epoxy primer, but that may be overkill.

Let us know how the foam replacement goes, I put a 1/2" thick foam piece in 
the seat base to bolster up the seats (which worked pretty well) and to try 
to control the  crumbling of the stuff that was in there, but mine still 
leave lots of little bits of foam rubber under the seats.

Greg Lemon 

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>