I used a big old Singer industrial sewing machine on the plastic and it
just punched through. However, I did do some touchup on the ends by
using a sewing awl and heating the needle so that it melted through the
plastic.
George Richardson
Key Men - Keys for Classics
www.key-men.com
On 1/18/2013 10:12 PM, Gary Nafziger wrote:
> I'm rebuilding my tr-3 side curtains and things are going well. However I'm
> having a problem fitting the forward solid window. It's very thin plexiglass
> and the only information I've been able to find simply says the front plexi
> window is sewn in with the vinyl trim.
> Does a person drill small holes through
> the plexiglass to pull the thread through? Is the thread then looped around
> the forward vertical frame to pull it tight? The forward vertical frame piece
> is also very thin and I'm wondering how to glue vinyl to that as well as
> attach the plexiglass.
>
>
> Just wondering is anyone has re-built they're side
> screens themselves and how they handled this.
>
> thanks
>
> gary n.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/gpr@key-men.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|