triumphs
[Top] [All Lists]

[TR] Mounting TR3A Tub on Frame (Third Try-the message gets scrubbed)

To: "triumphs@autox.team.net" <triumphs@autox.team.net>
Subject: [TR] Mounting TR3A Tub on Frame (Third Try-the message gets scrubbed)
From: Joe DeMuth <jdemuth@ties2.net>
Date: Mon, 7 Jan 2013 08:42:51 -0600
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
I am in the process of securing the tub (newly painted) to the restored frame
of a TR3A. In a trial fit I find that the
stack of four rubber mounting pads on the outriggers that are recommended as a
starting point for truing up the
body leave the car floor pans well above the frame. My question is this, are
the floor pans supposed to rest
directly on the rubber strips atop the fram3, or is there supposed to be a
gap. The former makes most sense to
me, but in order to get that to happen, I think I would be down to 1 pad on at
least one of the outriggers. Any

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>