Re: [TR] Ratco Throttle Linkage

["ptegler" <ptegler@verizon.net>]

yep... bend your pedal arm and adjust the stop behind the pedal so it 
travels farther
Paul Tegler
ptegler@verizon.net
www.teglerizer.com
----- Original Message ----- 
From: "Alex & Janet Thomson" <aljlthomson@charter.net>
To: "'Sam Clark'" <trdoctor@aol.com>; <triumphs@autox.team.net>
Sent: Monday, May 07, 2012 5:13 PM
Subject: Re: [TR] Ratco Throttle Linkage


> Maybe the folks at SpitBits could help.
> http://www.spitbits.com/
>
> Alex Thomson
>
>
>
> -----Original Message-----
> From: triumphs-bounces@autox.team.net
> [mailto:triumphs-bounces@autox.team.net] On Behalf Of Sam Clark
> Sent: Monday, May 07, 2012 11:38 AM
> To: triumphs@autox.team.net
> Subject: Re: [TR] Ratco Throttle Linkage
>
> I found the website for Ratco but, unfortunately, it won't solve my 
> problem.
> I have a '72 GT6 with Strombergs and it doesn't have the same linkage as 
> the
> TR6 or earlier GT6.  There is not a cross shaft but, instead, a cable pull
> that comes from the pedal across the top of the engine to a center top 
> pull.
> The only adjustment is for play in the linkage.  The problem I have is 
> that
> I can't get full open on the butterflies.  Instead I get about 60%.  Any
> suggestions?
> Sam
> On May 7, 2012, at 12:15 AM, triumphs-request@autox.team.net wrote:
>
> > From: "Alex & Janet Thomson" <aljlthomson@charter.net>
> > To: "'Dave Connitt'" <dconnitt@fuse.net>, <triumphs@autox.team.net>
> > Subject: Re: [TR] Ratco throttle linkage
> > Message-ID: <002801cd2bf0$203a9cf0$60afd6d0$@charter.net>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Dave - Try the following -
> >
> > www.rat-co.com
> > or
> > http://www.sites.google.com/site/tonyratco/
> >
> > Alex Thomson
> >
> >
> > -----Original Message-----
> > From: triumphs-bounces@autox.team.net
> > [mailto:triumphs-bounces@autox.team.net] On Behalf Of Dave Connitt
> > Sent: Sunday, May 06, 2012 7:46 PM
> > To: triumphs@autox.team.net
> > Subject: [TR] Ratco throttle linkage
> >
> > I was just looking for the RATCO cable throttle linkage and google
> > can't find them.
> > Interresting....
> > Dave Connitt
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/aljlthomson@charter.net
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net 
** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net