[TR] SU HS-6 needles

triumphs

[TR] SU HS-6 needles

Subject:	[TR] SU HS-6 needles
From:	dconnitt at fuse.net (Dave Connitt)
Date:	Sun, 6 May 2012 14:24:04 -0400

Hi List,
Well, with the help of Bill Beech and Micheal Marr I was able to fix my SU
HS-6 problem with the front carb needle not dropping down all the way.  I just
had to center the jet and all is well. Next problem is how to remove some of
the slack in the throttle linkage were the bell crank between the carbs
converts the front/back motion to up/down. Kinda sloppy..
Thanks again!
Dave Connitt

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] SU HS-6 needles, Dave Connitt <= [TR] SU HS-6 needles, Dave Connitt

Previous by Date:	Re: [TR] Horn with a mind of its own, Joe Curry
Next by Date:	[TR] Horn with a mind of its own, terryrs at comcast.net
Previous by Thread:	[TR] Horn with a mind of its own, Irv Korey
Next by Thread:	[TR] SU HS-6 needles, Dave Connitt
Indexes:	[Date] [Thread] [Top] [All Lists]