triumphs
[Top] [All Lists]

[TR] Spitfire Turn Signals

Subject: [TR] Spitfire Turn Signals
From: elliottr at rmi.net (Roger Elliott)
Date: Sun, 29 Apr 2012 15:13:08 -0500
Hi,

I am hoping someone can help me with a puzzle I am having about the turn 
signals not working.   I struggle to diagnose electrical problems.

The turn signals on both sides of my 80 Spitfire stopped working.  The 
hazard flashers also stopped working.   All of my fuses are okay and 
things on the same fuse as the turn signals work.

Knowing that the turnsignal and hazard flashers both run through the 
hazard switch,  I pulled the hazard switch several times  and got it so 
that the hazard flasher would work part of the time - the turn signals 
still never worked.

I got the hazard switch and cleaned each contact.  Now the hazard 
flashers work reliably.  Turn signals still don't.

There appear to be two power wires going to the hazard switch.  Purple 
had power all of the time and green when ignition is on.  If I jump 
between the purple and green, the turn signals work. With the jumper 
removed they still don't work.

It looks like the powered green wire comes from the voltage stabilizer.  
There is continuity between the voltage stabilizer and the green wire in 
the hazard switch.

So, I am at a loss.

The turn signals works when the purple and green wire are jumped.  So, I 
have ruled out the switch and the relay.

The fuse is fine.

The lights all light up appropriately when using either the hazard 
flasher or jumped turn signals. So lights and grounds seem to be okay.

There is continuity between the voltage regulator and the green wire at 
the hazard switch.   Though when I check for voltage at the green wire, 
there isn't any.   I expected voltage, but not sure how there can't be 
since there is continuity with the voltage stabilizer and there is power 
to the stabilizer.


Any suggestions on what the problem is?   (besides my lack of electronic 
knowledge :))

Thanks,
Roger Elliott
1980 Spitfire

<Prev in Thread] Current Thread [Next in Thread>