triumphs
[Top] [All Lists]

[TR] Shade tree Timing

Subject: [TR] Shade tree Timing
From: wbeech at flash.net (wbeech at flash.net)
Date: Sat, 14 Jan 2012 17:44:14 -0600
References: <94163CA8E0084C9AB32B01795BADFD5E@bboffice> <6660C46BB8B541D197CADB9507E19BDF@DaveLaptop>
Dave,
This is it, thanks.  So, assuming the mark on my wheel is TDC, 4 degrees =
4.8mm or .189" or 3/16".

Can someone check my math?

Thanks,
bill 

-----Original Message-----
From: Dave Connitt [mailto:dconnitt at fuse.net] 
Sent: Saturday, January 14, 2012 5:17 PM
To: wbeech at flash.net; triumphs at autox.team.net
Subject: Re: [TR] Shade tree Timing

Bill,
I came across this link awhile back regarding locating TDC on an assembled
engine and then deterimining where to put the timing mark.

http://tr4triumph.blogspot.com/search?updated-min=2011-01-01T00%3A00%3A00Z&u
pdated-max=2012-01-01T00%3A00%3A00Z&max-results=6

It seems like it would work but I haven't tried it.

Regards,
Dave Connitt
'67 TR4A IRS
http://home.fuse.net/davestr4a


----- Original Message -----
From: <wbeech at flash.net>
To: <triumphs at autox.team.net>
Sent: Saturday, January 14, 2012 4:19 PM
Subject: Re: [TR] Shade tree Timing


> Not having marked my pulley with a degree wheel when I had it apart a few
> years back, I am trying to guestimate what 4 degrees BTDC looks like in
> terms of inches/millimeters.
>
> I am kind of thinking that if the TDC mark flashes about 1/4-3/8 before 
> the
> pointer that I am pretty close.  Has anyone ever put a ruler to this 
> before?
>
> Best,
> Bill
>
> Bill Beecher
> '58 TR-3A TS30766L  "Tarbaby"
> www.triumphowners.com/1566
> "A Triumph is man's best friend, it always comes when it is called...of
> course, some times it is difficult to make it go"
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/dconnitt at fuse.net

<Prev in Thread] Current Thread [Next in Thread>