As far a originality, probably anything goes that does the job. As this was
most likely at the dealers discretion, it was probably the wash boy that was
assigned the job of putting the plates on. I have a brass 1/4-20 nuts and
bolts on the bottom and then I turned a couple of bolts around on the top
and so I could hang a YOM plate over my Antique Car plate when I go to a
show.
Just do some that looks nice with your car, and it should be fine.
Bill
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Thursday, January 12, 2012 4:49 AM
To: triumphs at autox.team.net
Subject: [TR] Number plate fixings
Morning all (or afternoon) what is the standard approach for fixing
registration number plates to the early TR's, I don't see many people using
chrome bolts in any of the images in my books, would the nylon type be
acceptable, I know there may be a difference either side of the pond on this
one, but thought I'd ask Regards John
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|