triumphs
[Top] [All Lists]

[TR] Fwd: 1972 Triumph TR6 Temp - RESOLVED

Subject: [TR] Fwd: 1972 Triumph TR6 Temp - RESOLVED
From: thenicholls at verizon.net (thenicholls at verizon.net)
Date: Mon, 09 Jan 2012 07:20:50 -0600 (CST)
Just to update the list and close this item, over the weekend I installed a new 
temperature sensor I got from TRF.  I really did not believe that this could be 
the issue, I mean the thing is just a hunk of metal, right?
 
Well, installed and took a test drive, and the temp is now reading correctly.
 
Live and learn, thanks to everyone for their input.
 
Craig H. Nicholls
1972 Triumph TR6
Vienna, VA

On 11/16/11, William Pugh<anabil007 at comcast.net> wrote:

Begin forwarded message:

> From: William Pugh <anabil007 at comcast.net>
> Subject: Re: [TR] 1972 Triumph TR6 Temp - UPDATE
> Date: November 16, 2011 9:03:41 AM PST
> To: thenicholls at verizon.net
> Cc: triumphs at autox.team.net
>
> I have had very good luck with NOS type instruments from these guys"
>
>
> http://www.gaugeguys.com/Smiths/classic.htm
>
> I got an Oil Pressure / Temperature combination for my TR3 ... the quality
was outstanding. I would think the same might work for you.
> I also invested $40.00 for a laser temperature reader (you just point a pull
the trigger and it tells you the temperature at any given point)
> Also kind of neat for measuring temps on lots of stuff, including my Cat
...
>
>
> On Nov 16, 2011, at 7:08 AM, thenicholls at verizon.net wrote:
>
>> List,
>>
>> Just an update, I got a temp gauge from a friend of mine. Went out and ran
72 TR6 until temp moved and oil pressure came down.
>>
>> Tested temp with the gauge along the engine on the side where the exhaust
is. I got readings of 187-192 degrees which seems right to me.
>>
>> So, now I am down to either the sending unit is bad, or just the gauge is
reading low. I heard from a lister who lives near me that he has the same
situation and is just not worrying about it.
>>
>> My issue is that I ordered a new sending unit from TRF GTR110 4/2009 and
attempted to install it, it did not fit. Since it is the only one listed by
the big three, I could not figure out why it would be wrong, so I pulled the
existing one, cleaned it up, and put it back in.
>>
>> I know it is not the voltage stabilizer because I put gas in it over the
weekend and it is reading correctly.
>>
>> At this point, I am going to get the TRF sending unit and stop by a local
British car shop for some free advice.
>>
>> Will let you know what happens.
>>
>> Craig
>> 1972 TR6
>
>
> "Life is too short to drive Boring Cars"
>
> Bill Pugh
> Wallace, CA
> Casper
> 1957 TR3
> TS16665L
> anabil007 at comcast.net


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/thenicholls 
at verizon.net

<Prev in Thread] Current Thread [Next in Thread>