triumphs
[Top] [All Lists]

[TR] TR3 how to set valve clearance with the front apron on.

Subject: [TR] TR3 how to set valve clearance with the front apron on.
From: wbeech at flash.net (wbeech at flash.net)
Date: Tue, 3 Jan 2012 16:53:16 -0600
References: <ECFAC21AA98E4BD6BFAD6711E6DBD345@mediacenter>
With the plugs removed, I can turn mine with the fan.  Or, bump it with the
remote button on the solenoid.
Bill
Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Jeremiah Curry
Sent: Tuesday, January 03, 2012 4:11 PM
To: triumphs at autox.team.net
Subject: [TR] TR3 how to set valve clearance with the front apron on.

Hi Guys,

 

Probably an easy question

 

 I just replaced the headgasket in my TR3 and figured that since I removed
the rockers, I should re-set the clearance.  Last time I did that, the front
apron was off and I just turned the engine over using the handcrank.  Now I
can't do that (hole in radiator/grill don't line up, probably because I have
a TR3a radiator on a TR3)  How do you turn the engine the right amount to
get each cylinder TDC?

 

Thanks,

Jeremiah

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net

<Prev in Thread] Current Thread [Next in Thread>