John,
If you don't have it yet, do not forget the bumper that fits between the
mirror and windscreen.
Sent from mobile Bill
On Jan 8, 2012, at 8:49 AM, Chris Simo <ccsimonsen@gmail.com> wrote:
> Hi John - Just took one out of my TR2 - it's a pointed chromed oval head
> 10/32 - though I could not get my rusty screw to go easily through my 10/32
> tap - I measured to be sure - .183 on the major thread diameter and 32
> pitch threads from the thread guage. Thread length approx .41 inches
>
> Chris
>
> On Sun, Jan 8, 2012 at 7:52 AM, John Gillis <JGILLIS@tcd.ie> wrote:
>
>> Fuse issue sorted, many thanks, next what are the screws that fit the
>> mirror
>> to the dash? the Moss catalogue and my S.T Parts manual both indicate
spire
>> screws (chromed) I am fairly sure I can see threads in the holes on the
>> dash
>> for mine, was there a change to screws at some stage? I imagine I will
also
>> have to remove the windscreen to fit the mirror regardless of the type of
>> fixing?
>> Regards
>> John
>> 1954 TR2 Long Door
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|