That looks terrific. Exactly what I had in mind. It's a "Wheelskins",
right?
Thanks,
Hans
On Nov 19, 2011, at 8:31 AM, Randy and Valerie DeRuiter wrote:
> Hans-
>
> Thought you might want a picture showing this size on a 3A wheel. I
> think the overall diameter is good, and I'm happy with the
> circumference. You might be able to cheat a little and go less than
> 2.5" but I didn't want any gap and everything is still tight.
>
> Randy
>
> > From: tr3 at roadrunner.com
> > To: triumphs at autox.team.net
> > Date: Fri, 18 Nov 2011 20:34:27 -0800
> > Subject: Re: [TR] Tr3 Steering wheel cover
> >
> > Yes, you are right. I just checked too. I could only find covers
> > that were made for specific cars on ebay (no TR's of course), but I
> > wrote a vendor an email.
> > Thanks
> >
> > On Nov 18, 2011, at 8:07 PM, Randy and Valerie DeRuiter wrote:
> >
> > > Not sure if there is variation on these wheels, but the outer edge
> > > diameter on mine is 16.75" (just checked, its not on the car
> yet!).
> > > The 2.5" circumference wound up being very good as well when the
> > > stitches were drawn tight.
> > >
> > >
> > >
> > > Thanks Randy, I thought the dia. was 16 1/2" for the TR3(?)
> > > Hans
> >
> >
> > triumphs at autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/triumphs/deruiterville at hotmail.com
> <IMG_7358.JPG><IMG_7359.JPG>
|