| Subject: | [TR] broken TR-4 head |
|---|---|
| From: | gregmogdoc at surfnetusa.com (Greg Solow) |
| Date: | Sun, 31 Jul 2011 12:00:36 -0700 |
| References: | <mailman.4.1312135201.30820.triumphs@autox.team.net> |
It looks like there is still plenty of threaded hole left. The area around
the intake port does not get very hot. coat a stud with a light coat of
grease, screw it into place. Fill the broken area with JB Weld or another
good steel epoxy filler. Let the epoxy harden, then remove the stud and
carefully file the surface flat. That should make it serviceable.
Greg Solow
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TR] broken TR-4 head, Greg Solow |
|---|---|
| Next by Date: | [TR] TR3A Odd overdrive behaviour, Art McEwen |
| Previous by Thread: | [TR] broken TR-4 head, Greg Solow |
| Next by Thread: | [TR] TR3A Odd overdrive behaviour, Art McEwen |
| Indexes: | [Date] [Thread] [Top] [All Lists] |