| Subject: | [TR] Dzuz Aluminum Bonnet Grommet |
|---|---|
| From: | keithstewart at execulink.com (Keith Stewart) |
| Date: | Mon, 23 May 2011 18:05:44 -0400 |
| References: | <mailman.5.1306173602.27879.triumphs@autox.team.net> |
Need to install the aluminum grommet for the dzuz fastener on the bonnet. What is the correct way to flare the grommet under the hood to lock it in? ? ++++++++++ What about a stove bolt with taper head to give the taper and a washer and nut on the other side to gradually pull the two pieces together? Keith R. Stewart 75 Camden Road London, Ontario N5X 2K2 Home: (519) 660-1916 E-Mail: keithstewart at execulink.com |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TR] Dzuz Aluminum Bonnet Grommet, Keith Stewart |
|---|---|
| Next by Date: | Re: [TR] TR6 Rear End Clunk, Dave1massey |
| Previous by Thread: | [TR] Dzuz Aluminum Bonnet Grommet, Keith Stewart |
| Next by Thread: | Re: [TR] Dzuz Aluminum Bonnet Grommet, Frank Fisher |
| Indexes: | [Date] [Thread] [Top] [All Lists] |