triumphs
[Top] [All Lists]

[TR] master cylinder fix

Subject: [TR] master cylinder fix
From: yellowtr3 at yahoo.com (Frank Fisher)
Date: Thu, 21 Apr 2011 15:54:44 -0700 (PDT)
References: <376138.47435.qm@web65301.mail.ac2.yahoo.com>
id use it in the clutch, rather than the brake. mine is a TR3.
how did you hone them?
what tools did you use?
Frank




________________________________
From: Gary Nafziger <nafzigerg at yahoo.com>
To: triumphs at autox.team.net
Sent: Thu, April 21, 2011 3:47:33 PM
Subject: [TR] master cylinder fix

I had posted to the list concerning rebuild kits I'd installed in tr-3 
(girling) 

master cylinders which had been so tight they stuck when pushed in.? 

I decided to simply buy new master cylinders but then thought if I was going to 
pitch the old ones, might as well fiddle with them more and see what happens.? 
One of them was looser than the other so I started there and honed a little 
more 

and it worked much better.? The other one took lots more honing but eventually 
it also now works well.? I'm going to use them and watch them carefully.? The 
only concern I have is that I might have honed too much (or didn't get the 
inside honed evenly) which might result in earlier failure.? Wondering if 
anyone 

on the list has done this or has a warning for me concerning the fix.
Just thought it might be helpful to share what I tried.

gary n.
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation? $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: 
http://autox.team.net/mailman/options/triumphs/yellowtr3 at yahoo.com

<Prev in Thread] Current Thread [Next in Thread>