triumphs
[Top] [All Lists]

[TR] Head Off

To: "triumphs@autox.team.net" <triumphs@autox.team.net>
Subject: [TR] Head Off
From: John Gillis <JGILLIS@tcd.ie>
Date: Sat, 23 Apr 2011 17:55:26 +0100
Hi all- engine removed finally to deal with my cam shaft core plug that dropped 
out fooling me into thinking the rear crank seal was the culprit. Anyway you 
may remember I had problems getting smooth running, which seemed like a vacuum 
problem. I thought I might take the head off and have a look inside. Can I 
safely take the head off without disturbing the liners and their figure of 8 
seals? Also if I have a problem sealing around the inlet manifold, are the new 
thicker gaskets I read about on the list available for the low port head and if 
so from who?
Regards
John


John Gillis
Senior Conservator
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>