Chris,
Try you local bicycle or motorcycle shop, they would probably even make it
up for you with the end that you need. The cables that I bought for the TR3
door pulls already had the solder ball on them.
Bill
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Chris Simo
Sent: Sunday, March 13, 2011 6:17 PM
To: list Triumph
Subject: [TR] Cable fabrication
I need to adapt a modern cable to my tr4 choke cable. I think I have it
figured out cept for one thing. I need a little slug of what Looks like
solder ball at the end of the cable. Any one out there know how to make a
solder ball at the end of a steel cable?
Thanks chris
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|