triumphs
[Top] [All Lists]

[TR] Scuttle vent drain tubes.

Subject: [TR] Scuttle vent drain tubes.
From: 75TR6 at tr6.danielsonfamily.org (Bob Danielson)
Date: Tue, 1 Mar 2011 21:47:09 -0500
References: <0A4F6A83FF7746D5B5D7D424F7684B77@DaveLaptop>
The guy is Paul Rego who's very active in the BCF and 6-Pack Forums. He and 
his wife are the original owners of the TR6 and just recently added a TR8 to 
the stable. Paul's site is a wealth of information that is extremely well 
documented. Spend some time on his site and you'll learn a bunch of stuff.

Bob


Bob Danielson
1975 TR6 running with
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs
http://tr6.danielsonfamily.org



-----Original Message----- 
From: Dave Connitt
Sent: Tuesday, March 01, 2011 7:23 PM
To: triumphs at autox.team.net
Subject: Re: [TR] Scuttle vent drain tubes.

Hi List,
It took me awhile to find this website again but there is a really nice 
application of a Ford Mustang "quarter panel plug" that a guy used when 
restoring his TR6 to vent the scuttle out the front of the metal baffle that 
goes between the outer fender and the inner fender. I have seen other 
attempts at routing that little rubber hose thru a hole cut into the sill 
but this is really slick and not that expensive. If you go to the link below 
and scroll down a little past halfway, you will see a picture of the Mustang 
part in the package and the next picture shows the drain plugs installed. 
Very slick..


http://www.74tr6.com/repainting.htm


There is a lot of other nice improvements detailed on this website but I 
thought I would pass along this nice scuttle vent idea.

Dave Connitt
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: 
http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org 


<Prev in Thread] Current Thread [Next in Thread>