[TR] accelerator shaft bushings

triumphs

[TR] accelerator shaft bushings

To:	Triumph List <triumphs@autox.team.net>
Subject:	[TR] accelerator shaft bushings
From:	marty sukey <trmarty@hotmail.com>
Date:	Fri, 25 Mar 2011 09:24:57 -0400

Was there somebody on the list who was making accelerator shaft bushings, for 
where the shafts go through the bulkhead?
 
Thanks,
Marty                                     
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] accelerator shaft bushings, marty sukey <= [TR] accelerator shaft bushings, marty sukey Re: [TR] accelerator shaft bushings, Irv Korey [TR] accelerator shaft bushings, Irv Korey Re: [TR] accelerator shaft bushings, Joe Honor [TR] accelerator shaft bushings, Joe Honor Re: [TR] accelerator shaft bushings, Joe Honor [TR] accelerator shaft bushings, Joe Honor Re: [TR] accelerator shaft bushings, Bob Danielson [TR] accelerator shaft bushings, Bob Danielson Re: [TR] accelerator shaft bushings, Bob

Previous by Date:	[TR] TR4A - Body Side Molding Install, Don Spence
Next by Date:	[TR] accelerator shaft bushings, marty sukey
Previous by Thread:	[TR] TR6 Door Seal, Bill
Next by Thread:	[TR] accelerator shaft bushings, marty sukey
Indexes:	[Date] [Thread] [Top] [All Lists]