triumphs
[Top] [All Lists]

Re: [TR] carb link rod assembly parts

To: Gary Nafziger <nafzigerg@yahoo.com>
Subject: Re: [TR] carb link rod assembly parts
From: Geo Hahn <ahwahneetr@gmail.com>
Date: Tue, 22 Mar 2011 14:09:41 -0700
On Mon, Mar 21, 2011 at 5:40 PM, Gary Nafziger <nafzigerg@yahoo.com> wrote:

> Several of these balls are severely worn but the rods look very usable.
> Just wondering.


Mine had ovalled to the point where they would sometimes pop out -- by
rotating them 90 degrees (had to add a little washer to get them to tighten
at that position) the problem has never recurred.

Geo
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>