triumphs
[Top] [All Lists]

Re: [TR] Roll over bars

To: "'Randall'" <tr3driver@ca.rr.com>,
Subject: Re: [TR] Roll over bars
From: "Joe Curry" <spitlist@cox.net>
Date: Fri, 18 Mar 2011 16:37:41 -0700
The SCCA allows bracing onto structural body parts (such as wheel arches)
when it is inconvenient (or impossible) to secure it to the frame.  This is
for Autocross rules.  Not sure about road race rules (GCR).

Joe

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Randall
Sent: Friday, March 18, 2011 4:19 PM
To: Triumphs@autox.team.net
Subject: Re: [TR] Roll over bars

> Who makes a good bolt in roll over bar for the tr4 and tr3?

My opinion, such a thing is impossible.  To be good for anything except
bragging, a roll bar has to tie into the frame.  But the frame is in a very
inconvenient place to attach a roll bar.  Hence the only way to do it right
is to weld in additional steel to mate the roll bar to the frame.

Anything that just bolts to the sheet metal will just rip right out before
it will do any good in an accident.

-- Randall 

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/spitlist@cox.net

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>