Man up and bolt it together. You don't need no stinkin' spring.
------Original Message------
From: terryrs@comcast.net
Sender: triumphs-bounces@autox.team.net
To: triumphs@autox.team.net
Subject: Re: [TR] Spring: Non-Triumph
Sent: Feb 4, 2011 6:29 PM
Oh, and coil body 1 and 3-8ths outside to outside.
Thanks, everyone, for even looking at this!
****************************
Apologies for bombing the list. Am turning to the most knowledgeable guys I
know for this.
Have been renovating a study upstairs, building a dream desk, all that. Have
an oak swivel office chair I stumbled on 35 years ago that I used through
college and life, but the spring broke and now it's useless.
I need a hooked extension spring as follows:
6" total length
.25" wire diameter
5.5" coil length
.5" gap between hook and body
This happened long ago, and I was able to source an old automobile hood spring.
Now it broke.
Tried McMaster Carr, but can't locate something similar.
Any thoughts?
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/dlylis@gmail.com
Sent via BlackBerry by AT&T
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|