FROM TRA Judging Guide
Chassis Plate. This is a brass plate mounted on the firewall above and
left center of the battery. Mounting is done with pan-headed, slotted,
sheet-metal screws.
EB Plate. This plate is mounted above the Chassis Plate. Mounting is done
with pan-headed, slotted, sheet-metal screws. The plate is painted body
color. Numbers stamped on plate begin with "EB". TR3Bs do not have the EB
plates.
My note:
EB Plate screws should be body color as well.
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Dave1massey@cs.com
Sent: Tuesday, January 25, 2011 4:41 PM
To: triumphs@autox.team.net
Subject: Re: [TR] TR3A body number tags
In a message dated 1/25/2011 3:27:17 PM Central Standard Time,
dwillner@ptd.net writes:
> Were the two brass body number tags (over the battery) on the firewall
> originally riveted in place like the commission plates, or just
> screwed in with brass slotted screws...I have screws on mine, but have
> seen several riveted lately. Thanks
>
For some reason I had it in my mind that they were held in with screws. So
I put mine in with screws. Stainless. Slotted. Just like the factory
would have. Except the stainless part. I might have to ding myself a few
points at the next concours.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|