Trying to keep down the heat build up, huh?
I didn't realize that it was wool - but did a 'check' and it is.. Anyway -
it the same thickness as a pair of wool slacks so probably not much
insulation. I have not heard of any insulation material that would work
because of the contour of the inside of the top. If you find something -
post it to the list as I am sure there are others as interested as I am.
I was thinking about but not looked into using truck bed liner
(paint/spray). the problem is that it may not be 'smooth' enough not to
show through the material. Another option would be high-density foam
1/4-1/2" thick. That is where the inside contour may be problematic.
That was as far as I got and that part of the project is some time off...
Carl
----- Original Message -----
From: "William Brewer" <wsb1960tr3a@att.net>
To: "Triumphs" <triumphs@autox.team.net>
Sent: Wednesday, November 10, 2010 3:05 PM
Subject: [TR] TR3 Hard Top Questions
> I ordered a wool headliner kit from TRF for my TR3A steel hard top. Is
> that sufficient insulation or is there a better way to insulate underneath
> to keep you a little warmer in the winter?
>
> Bill in Tehachapi
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Manage your account:
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|