triumphs
[Top] [All Lists]

Re: [TR] TR4 tonneau

To: triumphs@autox.team.net
Subject: Re: [TR] TR4 tonneau
From: Bob <yellowtr@adelphia.net>
Date: Tue, 8 Jun 2010 17:46:28 -0400
On Tuesday, June 08, 2010 01:12:05 pm Chris Simo wrote:
> My 63 TR4  has lift a dot around the rear coping  and snaps at the dash and
> doors.    The dash snaps are a little odd -  the snaps are attached to
> sheet metal strips that are attached via the 3 chrome bolts  at the base
> of the windscreen.   The center one is smart - it has snaps at either side
> of the bolt -  the left and right sides are not a good design - snap at
> end of metal strip -  encourages rotation of snap.
> 
> Does anyone else have this setup?
> 
> Chris
> 63 TR4 (originally imported to germany and has locking steering column)
> 
Chris,

Yes I do same as you: Lift-o-dots in the rear, snaps on the doors and dash.

I used metal male snaps on the doors.

Maybe the lift-o-dots on the dash were for the early 4s? 61 and 62s?

63 TR4

Bob

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>