Michael,
It the indicator arm is clicking when it hits the cam lobe on the steering
column and the signals continue to flash, can you cancel the signals by
manually moving the indicator lever? If you're not moving and you move the
indicator lever for, let's say a right turn, then move the indicator back to
"off" position (all without turning the steering wheel) does the signal
stop flashing? If the answers to these questions are yes it sounds like
either the steering column cam lobe is worn or not fitted correctly or the cogs
on the indicator switch aren't really making a firm contact with the cam
lobe...maybe because the indicator lever is missing a fastening screw or is
simply loose??
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6 CF57822U
In a message dated 6/8/2010 2:23:50 P.M. Eastern Daylight Time,
michael.stenhouse@c2i.net writes:
I have checked the cam and it is in place and I hear a click when it passes
the spring loaded cams on the indicator unit.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|