> What the trick for stopping the ball from spinning?
One trick is to use a plain nut instead of a Nyloc to initially seat the
taper. Torque it down, then remove it and install the Nyloc.
Or, what I usually do is stick a big pry bar between the tie rod end and
whatever is convenient, to force the taper together long enough to tighten
the nut.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|