Carl, am I right in remembering that the guard would be secured by the same
bolts that hold the bumper brackets? If that's correct, the bolts are p/n
HB0937 (1, accommodates support bracket, distance tube and stiffening bracket;
3/8" UNF, 4 and 5/8" long) and p/n HB0926 (3, support bracket to chassis; 3/8"
UNF, 3 and 1/8" long).
If those are NOT the bolts that hold the radiator guard, then never mind! :-(
--Andy Mace
*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so much of a jet, it's more your, er, Triumph
Herald engine with wings.
-- Cut-price Airlines Sketch, Monty Python's Flying Circus (22)
Triumph 10 / Herald / Sports 6 vehicle consultant, The Vintage Triumph
Register: http://www.vtr.org
Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph Herald
Database: http://triumph-herald.us
-----Original Message-----
From: Carl TR <cfmtr3a@verizon.net>
To: triumphs@autox.team.net
Sent: Wed, May 19, 2010 7:11 pm
Subject: [TR] TR3 Radiator Guard
I found it interesting that the TR3 Parts manual does not list the bolts that
hold the Radiator guard to the frame. I'm sure I'll be able to figure out
what size, etc. but found it interesting as I am sure it wasn't fastened with
chewing gum.
The guard is item M1 in the manual in the chassis/frame section.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|