Just wanted to report that I got it working. Replacing the blinker module
with a generic one from checker made the lights blink at the proper speed.
Then I ran new wires from the front of the car back to the trunk for the
signal lights. Now all of the lights work! Thanks everyone and expecially
Randall for your help.
Now I just need to replace the windshield, attach the bonnet with new
hinges, and mount the front bumper and I think I will be ready for a safety
inspection.
Jeremiah
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Randall
Sent: Saturday, December 19, 2009 9:21 PM
To: triumphs@autox.team.net
Subject: Re: [TR] signals don't work
> The lights appear like those in the picture at
> http://www.magma.ca/~tboiscla/TR3A_RrTrLid.jpg except that
> the center light
> is not chromed and runs with the running lights. I have the
> wiring so the
> lights on the outside are running lights, and brake lights,
> the center light
> is a running light and license plate light, and the two in
> between are what
> I am trying to use as signals. From what I have read, that
> is probably
> correct, though unanticipated on a car this old.
My apologies, Jeremiah, I read the line for UK cars instead of US. You are
correct, your car should have the separate turn signals (assuming it is a US
model).
Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
