triumphs
[Top] [All Lists]

[TR] TR4 Master cylinder problems

To: triumphs@autox.team.net
Subject: [TR] TR4 Master cylinder problems
From: Angelo Graham <agraham@execulink.com>
Date: Mon, 11 Jan 2010 10:32:02 -0500
Hello List:
Working on a pair of TR4 master cylinders (brake & clutch) and trying to 
fit rebuild kits. Have the pistons free and the circlips out, but I 
can't seem to extract the pistons. They appear to be hitting a something 
at the circlip end of the bore. I can't feet any wear ridge or anything 
that might be stopping the pistons. Am I missing a step here or is it 
the case that it doesn't take much to prevent the pistons from exiting 
the bores. Have tried much soaking, etc. and trying to lightly 
emery-cloth the part of the bore that I can reach.
Any tips or is this a common problem??
Thanks in advance,
Angelo Graham

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Suggested annual donation  $11.47



Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>