I'm faced with a dilemma. I purchased a 69 TR6 as a parts car for the rebuild
of my 70 RHD PI that was severely damaged. Upon dismantling the 69 I
discovered that the tub is severely rusted and damaged. The inner/outer
sills, floor boards, spare tire pan, captured nuts & plates and foot wells are
rusted through and need to be replaced/repaired. Also the rear end sustained
major damage and the repair was worse. The rear end is shifted about = inch
to left and when they replaced the rear end, it was not aligned correctly -
they ended up using a 2 inch block of wood between the frame and rear body
mounts. It would take a lot of work to put it back together correctly. I
don't have the temperament or money to have it done. I can salvage the front
clip -from the firewall forward but the rest is destined for the scrap. But
before I make a final decision, I thought I would query the list to see what
others may think.
Thanks,
David Stauffacher
Ramona, Ca
CP51649
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|