Are you talking about the small, square headed pipe plug, or the large,
flat brass plug which holds the filter in place on an A type?
I've always used a hammer and a suitable drift to remove and
install the large brass plugs, carefully applying the force to
the notches in the cap.
mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|