Scott, Enco has 6-36 tap listed. _http://www.use-enco.com_
(http://www.use-enco.com)
NFI
Rodney Ford, Brick, NJ
President, Positive Earth Drivers Club
TR4A IRS CTC 60536 L
TR7 Spider TPVDJ8AA400612
------------------------------
Message: 14
Date: Mon, 19 Oct 2009 22:07:23 -0400
From: "Scott Suhring" <suhringtr36@comcast.net>
Subject: [TR] Re-Tapping Threads
To: "Triumph Mail List" <triumphs@autox.team.net>
Message-ID: <CC2A492396024DBCA7E39FFDB548FBE9@Scott>
Content-Type: text/plain; charset="us-ascii"
Can you re-tap threads using a smaller threads per inch tape? I have a
screw
hole that is a size #6 with 36 thread and I can only get a #6 screw with 32
thread screw. Can I tap the 36 thread hole with a 32 tap and use the 32
thread screw without messing up the threads? Hope this is clear....
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|