I've got 3 kits left, and it sounds like Joe and Sean Alexander is
taking over production after that.
They are $59.95 plus $10 shipping for both seats in the TR-6. They
use the seat adjusters from the Miata. The seat is low enough that
depending on the seat pan you may need to dimple it a little. It
allows the full range of adjustment. All of the bracketry is powder
coated, and it comes with enough nuts / bolts / washers to perform
the full install. Of course, you need to source the Miata
seats. From what I've read, the earliest seats to the latest seats
all have the same mounting pattern - the Miata guys grab seats from a
late model car for earlier cars.
- Tony Drews
At 07:57 AM 10/5/2009, Mitch wrote:
>What is the price for the conversion tracks? Do they keep the
>seats low & allow full movement.
>----- Original Message ----- From: <n197tr4@cs.com>
>To: <75TR6@tr6.danielsonfamily.org>; <triumphs@autox.team.net>;
><6pack@autox.team.net>
>Sent: Saturday, October 03, 2009 10:47 PM
>Subject: Re: [6pack] Miata Seat Conversion....
>
>
>>Bob,?? Nice job on the conversion.?
>>
>>
>>
>>Tony Drews decided not to continue sales?on the TR6 Miata
>>Conversion Kit, and offered it back to us. ?Sean & I have elected
>>to continue the production of the kit. Sean developed the
>>manufacturing processes and supplied the pieces to Jack, anyway, so
>>it makes sense for us to continue the kit if there is a demand.
>>
>>
>>
>>So if anyone wants a kit this winter, lets round up some orders. I
>>have one set one the shelf, in the meantime. We could do 15-25 sets
>>and it would be worthwhile to do.
>>
>>
>>Thanks!
>>
>>
>>
>>Joe & Sean Alexander
>>
>>
>>
>>
>>-----Original Message-----
>>From: Bob Danielson <75TR6@tr6.danielsonfamily.org>
>>To: triumphs@autox.team.net; 6pack@autox.team.net
>>Sent: Sat, Oct 3, 2009 6:49 pm
>>Subject: [6pack] Miata Seat Conversion
>>
>>
>>
>>
>>I've already posted this to the Forums and figure I'd also share it with the
>>Mail Lists. If you're thinking of doing the Miata seat conversion for your
>>Triumph, I just updated my site with about 12 pages and 150 pictures showing
>>how it's done. It includes: seat separation, upholstery removal, headrest
>>speaker installation, leather cover installation and mounting brackets.
>>http://tr6.danielsonfamily.org/MiataSeats1.htm
>>
>>Bob
>>
>>Bob Danielson
>>1975 TR6 CF38503U
>>Running w/ Throttle Body Injection
>>Toyota 5 Speed & Nissan LSD
>>http://tr6.danielsonfamily.org
>>6pack@autox.team.net
>>http://autox.team.net/mailman/listinfo/6pack
>>
>>http://www.team.net/archive
>>
>>You are subscribed as n197tr4@cs.com
>>_______________________________________________
>>
>>Support Team.Net http://www.team.net/donate.html
>>
>>6pack@autox.team.net
>>http://autox.team.net/mailman/listinfo/6pack
>>
>>http://www.team.net/archive
>>
>>You are subscribed as ms6453@optonline.net
>
>
>
>_______
>
>Mitch Seff
>Brite Do-it best Hardware
>Locksmiths-Industrial supply
>112-15 Jamaica Ave
>718-849-8121 Fax 718-849-8567
>www.brite.doitbest.com
>brithard@optonline.net
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>
>http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|