A week ago I asked if anyone would scan a page from the Bently manual
showing the water flow diagram thru the 6 cyl engine (or describe the
water flow thru the water pump housing). ANYONE?
The pump housing has 2 parallel chambers. I **think** the coolant flow
is something like this: water from the lower rad port enters the
housing, housing splits the water into the 2 chambers. Rear chamber
pumps into the heater core and bleeds off to the thermostat chamber.
Forward housing pumps coolant into the head/block and the coolant
returns to the adjacent port which joins the thermostat chamber.
Is this description correct?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|