triumphs
[Top] [All Lists]

Re: [TR] There's always something......

To: "'Randall'" <tr3driver@ca.rr.com>, <triumphs@autox.team.net>
Subject: Re: [TR] There's always something......
From: "Andrew Uprichard" <auprichard@comcast.net>
Date: Sun, 26 Jul 2009 15:14:27 -0400
Thanks, Randall.  Didn't think they needed to be replaced as they were new
when I reconditioned the calipers.  I'll try the aluminum pad and let the
list know.

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Randall
Sent: Sunday, July 26, 2009 11:15 AM
To: triumphs@autox.team.net
Subject: Re: [TR] There's always something......

> My understanding was that this is caused by a vibration within the
caliper.
> Any suggestions for how to deal with it?  Thanks !

As mentioned, a thin pad of aluminum between the pad & piston seems to work
well.  I found some general-purpose ones at my FLAPS, that have an adhesive
back and cut to shape with scissors.  In the Help! Section, I might have the
package somewhere if you need a part number.

Other things that might help are resurfacing the rotors with something like
this
http://tinyurl.com/nlnpnz
or putting a bevel on the leading edge of the pads

Of course, I assume you've already tried replacing the pad hold-down
springs.

Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as auprichard@comcast.net

http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>