triumphs
[Top] [All Lists]

Re: [TR] TR6 Seat Belt Rebuilding

To: TR owners List <triumphs@autox.team.net>
Subject: Re: [TR] TR6 Seat Belt Rebuilding
From: Rich White <rlwhitetr3b@hotmail.com>
Date: Thu, 23 Jul 2009 11:19:43 -0500
My concern is that while the new seat belts might look good and in this case
be better than a set that are haft warn through.  Are they really as strong as
the original ones?

Rich White St. Joseph, IL USA

'63 TR3B TCF587L

That ain't a scrap pile, that is my car!

See it moves!




> Date: Thu, 23 Jul 2009 10:38:20 -0400
> From: akgraves@cox.net
> To: triumphs@autox.team.net; wsb1960tr3a@att.net
> Subject: Re: [TR] TR6 Seat Belt Rebuilding
>
> > Date: Sat, 18 Jul 2009 17:59:32 -0700 (PDT)
> > From: William Brewer <wsb1960tr3a@att.net>
> > Subject: [TR] TR6 Seat Belt Rebuilding
> > To: Triumphs <triumphs@autox.team.net>
> > Message-ID: <920257.87176.qm@web83302.mail.sp1.yahoo.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Does anyone know of somewhere where they rebuild original TR6 inertial
> > seat belts back to original spec's? Have any listers just rebuilt their
own?
> > Looking for things to do while the car is being repainted.
> > Bill in Tehachapi
>
>
>
> Bill,
>
> I rebuilt the seatbelts on my 1976 TR6 a few months ago. I did it because
the driver side belt had worn half through where the latch sits. I guess that
means I've stayed the same size (mostly) these past 33 years.
>
> I contacted Snake-Oyl several years ago but lost interest when they told me
how long they would have my belts. 4-6 weeks is too long for a daily driver.
>
> The job was not too difficult. I bought the belt material at a trim shop and
my wife was able to sew it to the anchor & reel. The tricky part is the
spring. No troubles with the first one, but the spring sprung on the second.
It takes a long time to wind that sucker back up.
>
> I'm fairly happy with the results. The belt does not retract any better than
it used to - in fact the insides were not dirty at all, which surprised me.
Also the inertia mechanism doesn't catch if you're sitting still. That is, it
doesn't catch if the belt is pulled real fast and I think it should. But if
the whole assembly is jiggled, it will catch easily.
>
> I took notes and a lot of pictures of the process which I can send if
interested.
>
> Art Graves
> 1976 Triumph TR6
> 1985 Jaguar XJ6
> Tulsa, OK
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as rlwhitetr3b@hotmail.com
>
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>