The clutch is very slow to release. It takes about three seconds from the
time that I press on the clutch pedal until the load is removed...
Congratulations Mike on your first ride, what a feeling!
I would go back and re-bleed the clutch slave line, try the easiest thing
first. Were the friction and pressure plates checked for true before you
put them in.
Then, it could be that there is just a lot of film/crud from sitting around
for seven years and a little more use will resolve it.
Good luck,
Bill Beecher
'58 TR-3A TS/30766 L (On the road in 2009!)
'59 TR-3A TS/64974 LO (in buckets, for sale... anyone?)
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|