Try Ted Schumacher at TSI. I bought a braided stainless oil pressure
line from him for my TR6. John Mitchell
sujit roy wrote:
> I'm adding an oil pressure gauge to the Stag. I'd like to know what material
> of flex pipe I should use as the pipe will run very close to the exhaust
> manifold. The oil pressure on the stag does not run much above 50-60 PSI
> Someone mentioned to use a steel tube to a point away from the manifold and
> then branch off using flex pipe.
> Any suggestions welcome.
>
>
> Thanks, Sujit
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|