Hmmm....
Pressing the horn button results in nothing more than a minor "thunk." This
happens with each horn with the other horn disconnected.
I've tested voltage to the horns.B It's good, so am pretty much thinking it's
a ground problem through the horn switch.B Both horns are new, were working
fine up to a week ago, and aren't that much out of adjustment both at the same
time, I should think.B But before I (omigod) remove the olive and pull the
control head out of the stator tube, any other thoughts?
Terry Smith, '59 TR3A
New Hampshire
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|