I've got a gentleman interested in a lightened TR-3 / 4 bolt on ring
gear. The machining cost per ring gear is less if we can do more
than one at a time. For a single ring gear, the price is $120 (you
supply the ring gear). If anyone else is interested in having one of
these done, we may be able to get the cost to a more reasonable
level. Let me know if interested, I'll try to coordinate. I do get
a SMALL cut from this for my time / efforts, so I can't say NFI...
This modification reduces weight where you can use it the most - at
the outer end of the flywheel. It is a good addition to a lightened flywheel.
- Tony Drews
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|