In a message dated 4/13/2009 8:58:36 PM Central Daylight Time,
grandfatherjim@gmail.com writes:
> I bought the kit of Dzus fasteners, washers, and right-sized nut and bolt
> to
> install them on the bonnet. A long time later, I got around to bolting
> down
> the spring brackets to the inner fenders.
> There's no way I can latch the fasteners, unless I don't know what I'm
> doing. The only thing I can imagine is that these fasteners just aren't
> long
> enough to reach down into the spring thing.
> I have posted pictures here:
>
> http://s148.photobucket.com/albums/s31/grandfatherjim/dzus/?action=view&;
> current=dzus1.jpg
> http://s148.photobucket.com/albums/s31/grandfatherjim/dzus/?action=view&;
> current=dzus2.jpg
>
You can buy shims for the receiver (the part that bolts to the inner
fender) and shim it up to reach the Dzus. (TRF #553001) stack up as many as
you
need.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|