On Saturday 28 March 2009 17:27:10 dorpaul wrote:
> I found a SAE 80W-90 Gear Oil for API Service GL-5, GL-4 and GL-3 for less
> than $5 a quart. However, is it necessary for me to find it for only
> "GL-4" service for it to be used in my rear axle/ non-OD transmission?
>
> Thanks, Paul Dorsey 60 TR3
Paul,
I would go with a straight GL-4. GL-5 is not good for brass/copper bushings in
your transmission.
I picked up a gallon of straight GL-4 at Napa for about 20$.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|