In a message dated 3/25/2009 11:37:15 AM Central Daylight Time,
Harrymague@aol.com writes:
> Hi All. I bought one of the RetroSound radios for my TR6. I originally
> wanted to just use the normal radio power lead. My problem is that is
> needs a
> constant 12V power source to work. Anybody have a good idea where to tap
> to
> get the 12V that won't be seen????? Thanks in advance.
>
Since you have a 74 you have the power tap on the battery cable. There are
three brown wires attached to it leaving one tab available four your radio.
But you will need a 3/8 QC push on connector which are kind of hard to find.
But that is the best spot for a high power amp.
One of those brown wires goes to the fuse block where it feeds the purple
wire circuit (fused). There might be a spare 1/4 in tab on the fuse block that
you can use.
Be sure and fuse it with the manufacturer's recommended fuse.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|