> My question is how can I run the motor for a few minutes to
> be sure everything is OK. I don't seem to be able to find
> the right combination of connections and the manual is no help.
The motor should run continuously if you apply power between terminals 1 and
2. Terminal 2 is normally the feed from the ignition switch (green wire),
while the wiper switch grounds terminal 1 to make the motor run.
Applying power between terminal 2 and the motor housing (or E terminal)
should make the motor run to it's parked position and stop.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|